How much Bilt Hamber Touch-Less to put in your foam lance or sprayer.
Fill the lance bottle with plain water, turn the dilution knob fully open (maximum, thickest foam), spray into a bucket until the bottle is empty, then measure what's in the bucket.
Rated flow on the washer's label is usually higher than real-world flow, so measuring is more accurate.
For sprayers the dilution is worked out on the volume in the sprayer.
Bilt Hamber's range is 0.5% to 2%. Use the low end for light dust or coated cars.
Touch-Less
then top up with 800 ml water
About 5 washes from a 1 litre bottle
Dilutions follow Bilt Hamber's published guidance for Touch-Less (PIR method). Not affiliated with Bilt Hamber. Always check the label on your bottle.